About Us
After entering the Autoclave Repair business, I started receiving calls from everywhere. People were fed up with being taken advantage of by the Autoclave Repair system and looking for an alternative .
So, after the many requests for help, considerable research and much soul searching……I came to the conclusion the best way I could help the most people, while still helping myself, was to show everyone how they could do their own autoclave repair
Even though most offered to pay for my advice, I decided to offer it for free.
And in return, I would simply ask those we help to get the parts they need for their autoclave repair and maintenance from us
Sounds fair, doesn’t it?
So I founded AllClaveParts.com “Autoclave Repair Made Simple”
By giving expert autoclave repair support freely, and offering Guaranteed Quality Autoclave Repair Parts at competitive prices, it has truly turned out to be a win-win situation for all of us.
To date, we have helped thousands of people, just like you, repair their own autoclave, and we are just getting started!
Hi, I have a Tutnauer EZ-9 autoclave that is giving high temperature fail messages. Is there a part I can order to fix it, or in general what can be causing this error?
–John Mamoun, DMD
Hi Dr Mamoun
HIGH TEMP – This message is displayed, the Cycle Fail indicator lights and the cycle
is aborted if the temperature rises 9 0F (5 0C) above the required
sterilization temperature during the Sterilization phase of the
cycle.
This message will also be displayed if the Temperature Sensor is
damaged. In this case the message will appear just before the Heat
phase starts
Possible causes for this message are:
a. The Heating Elements are remaining on instead of cycling on
and off.
Check for a shorted Solid State Relay, shorted Heating
Element or other short circuit
b. This message can ALSO indicate a bad Temperature Sensor– the message will display any time during the Heat Up
phase.
Replacing these parts is something you can do
As above, please let me know when the fail messages are appearing